Cisco Meraki CW9162 wifi router device

  • 2×2:2 MU-MIMO 802.11ax compatible
  • ~3.9 Gbps tri-radio aggregate frame rate24x7 real-time WIDS/WIPS and spectrum analytics via dedicated fourth radio
  • Integrated Bluetooth Low Energy Beacon and scanning radio
  • 1 x 2.5 Gbps mGig Ethernet port support
  • USB 2.0 host interface (Type A connector) with 4.5W power budget
  • Enhanced transmit power and receive sensitivity
  • Full-time Wi-Fi location tracking via dedicated 3rd radio
  • Integrated enterprise security and guest access
  • Application-aware traffic shaping
  • Optimized for voice and video
  • Self-configuring, plug-and-play deployment
  • Sleek design blends into office environments

Categories: , Tags: , , , , , , , , , ,

  • THÔNG SỐ KỸ THUẬT:

    Category Specifications
    Radios

    • 2.4 GHz 802.11b/g/n/ax client access radio

    • 5 GHz 802.11a/n/ac/ax client access radio

    • 6 GHz 802.11ax client access radio

    • 2.4 GHz, 5 GHz, and 6 GHz tri-band Air Marshal WIDS/WIPS, spectrum analysis, & location analytics radio

    • 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support Concurrent operation of all five radios

    Supported frequency bands (country-specific restrictions apply): :

    • 2.401 – 2.484 GHz ISM
    • 5.150 – 5.250 GHz (UNII-1)
    • 5.250 – 5.350 GHZ (UNII-2A)
    • 5.490 – 5.730 GHz (UNII-2C)
    • 5.735 – 5.825 GHz (UNII-3)
    • 5.850 – 5.895 GHz (UNII-4)
    • 5.925 – 6.425 GHz (UNII-5)
    • 6.425 – 6.525 GHz (UNII-6)
    • 6.525 – 6.875 GHz (UNII-7)
    • 6.875 – 7.125 GHz (UNII-8)
    Antenna

    • Integrated omni-directional antennas

      • 2.4 GHz: Peak gain 3.2 dBi, internal antenna, omnidirectional in azimuth

      • 5 GHz: Peak gain 4.7 dBi, internal antenna, omnidirectional in azimuth

      • 6 GHz: Peak gain 4.5 dBi, internal antenna, omnidirectional in azimuth
    802.11 ax compatible, 802.11ac Wave 2 and 802.11n Capabilities

    • UL/DL-OFDMA

    • Target Wait Time (TWT)

    • BSS coloring*

    • SU-MIMO and DL MU-MIMO support

    • Maximal ratio combining (MRC)

    • 802.11ax beamforming

    • 20 and 40 MHz channels (802.11n)

    • 20, 40, 80 MHz channels (802.11ac Wave 2)

    • 20, 40, 80 and 160MHz channels (802.11ax)

    • Up to 1024-QAM on 2.4 GHz, 5 GHz and 6 GHz bands

    • Packet aggregation – A-MPDU (transmit and receive), A-MSDU (transmit and receive)
    Power

    • Power over Ethernet: 37 – 42.5 V (802.3at compliant)

    • DC Power Adapter (12V)

    • Power consumption: 30W

    • Minimum power requirement: 30W (802.3at complaint)

    • Power over Ethernet injector and DC adapter sold separately

    Actual power consumption may vary depending on the AP usage
    Interfaces

    • 1x 100/1000/2.5G BASE-T Ethernet (RJ45)

    • 1x DC power connector (5.5 mm, center positive)

    • USB 2.0 at 4.5W (with 802.3at power)

    • Console – Only available in DNA Mode
    Mounting

    • All Cisco standard mounting hardware supported (AIR-AP-BRACKET-2 included)

    • Desktop, ceiling, and wall mount capable

    • Ceiling tile rail (9/16, 15/16, or 1 ½” flush or recessed rails), assorted cable junction boxes
    Physical security

    • Two security screw options (included) (13.5 mm long and 2.5 mm diameter and 5 mm head)

    • Kensington lock
    Environment

    • Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)

    • Nonoperating (storage) altitude test: 25˚C (77°F) at 15,000 ft (4600 m)

    • Operating temperature: 32° to 122°F (0° to 50°C)

    • Operating humidity: 10% to 90% (non-condensing)

    • Operating altitude test: 40˚C (104°F) at 9843 ft (3000 m)
    Reliability
    • Mean Time Between Failure (MTBF): 998,440 hrs at +25°C operating temperature
    Physical Dimensions

    • 7.8 x 7.8 x 1.7 in. (200 x 200 x 44.45 mm)

    • Weight: 2.05 lb. (0.93 kg)
    Security

    • Integrated Layer 7 firewall with mobile device policy management

    • Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal

    • Flexible guest access with device isolation

    • VLAN tagging (802.1q) and tunneling with IPsec VPN

    • PCI compliance reporting

    • WPA2-PSK, WPA2-Enterprise, WPA3 – Personal, WPA3 – Enterprise, WPA3 – Enhanced Open (OWE)

    • EAP Local Authentication – EAP-TTLS/PAP/ PEAP-GTC, EAP-TLS

    • AES encryption

    • Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration

    • Cisco ISE integration for Guest access and BYOD Posturing
    Quality of Service

    • Advanced Power Save (U-APSD)

    • WMM Access Categories with DSCP and 802.1p support

    • Layer 7 application traffic identification and shaping
    Mobility

    • PMK, OKC, & 802.11r for fast Layer 2 roaming

    • Distributed or centralized layer 3 roaming
    Analytics

    • Embedded location analytics reporting and device tracking

    • Global L7 traffic analytics reporting per network, per device, & per application
    LED Indicators

    • One power/booting/firmware upgrade status
    Regulatory

    • RoHS

    • For additional country-specific regulatory information, please contact Meraki sales
    Warranty
    • Limited Lifetime hardware warranty
    Ordering Information

    • CW9162I-MR: Catalyst CW9162I Cloud Managed 802.11ax Compatible AP

    • MA-PWR-30W-XX: Meraki AC Adapter for MR Series

    • MA-INJ-6: Meraki Multigigabit 802.3bt Power over Ethernet Injector (power cable separate SKU)

    • Cisco AIR-PWRINJ-6 802.3at

    • Cisco AIR-PWRINJ-7 802.3bt

    • Cisco AIR-PWRINJ-6 802.3at power cord – MA-PWR-CORD-XX (XX Country Code) should be ordered separately for the AC adapter and Ethernet injector

    • Mounting bracket: AIR-AP-BRACKET-1 and AIR-AP-BRACKET-2(bundled)

    • Meraki access point license required