| Category |
Specifications |
| Radios |
- 2.4 GHz 802.11b/g/n/ax client access radio
- 5 GHz 802.11a/n/ac/ax client access radio
- 2.4 GHz and 5 GHz dual-band WIDS/WIPS, spectrum analysis, and location analytics radio
- 2.4 GHz Bluetooth Low Energy (BLE) radio with beacon and scanning support
- Concurrent operation of all four radios
- Supported frequency bands (country-specific restrictions apply):
- 2.401 – 2.484 GHz
- 5.150 – 5.250 GHz (UNII-1)
- 5.250 – 5.350 GHZ (UNII-2A)
- 5.490 – 5.730 GHz (UNII-2C)
- 5.735 -5.825 GHz (UNII-3)
|
| Antenna |
- Internal antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz)
|
| 802.11ax, 802.11ac Wave 2 and 802.11n Capabilities |
- DL-OFDMA**, UL-OFDMA**, TWT support**, BSS coloring**
- 4 x 4 multiple input, multiple output (MIMO) with four spatial streams
- SU-MIMO, UL MU-MIMO**, and DL MU-MIMO support
- Maximal ratio combining (MRC) & beamforming
- 20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax)
- Up to 1024-QAM on both 2.4 GHz and 5 GHz bands
- Packet aggregation
** Feature is automatically enabled via firmware update to MR 27+
|
| Power |
- Power over Ethernet: 42.5 – 57 V (802.3at compliant)
- Alternative: 12 V DC input
- Power consumption: 30W max (802.3at required)
- Power over Ethernet injector and DC adapter sold separately
Note: Actual power consumption may vary depending on the AP usage.
|
| Interfaces |
- 1x 100/1,000/2.5G BASE-T Ethernet (RJ45)
- 1x DC power connector (5.5 mm x 2.5 mm, center positive)
|
| Mounting |
- All standard mounting hardware included
- Desktop, ceiling, and wall mount capable
- Ceiling tile rail (9/16, 15/16 or 1 1⁄2” flush or recessed rails), assorted cable junction boxes
- Bubble level on mounting cradle for accurate horizontal wall mounting
|
| Physical Security |
- Two security screw options (included) (13.5 mm long, 2.5 mm diameter, 5 mm head)
- Kensington lock hard point
- Concealed mount plate with anti-tamper cable bay
|
| Environment |
- Operating altitude: Up to 40,000 feet (12,192 meters)
- Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
- Humidity: 5% to 95% non-condensing
|
| Reliability |
- Mean time between failure (MTBF): 1,406,652 hrs at +25°C operating temperature
|
| Physical Dimensions |
- 12.05” x 5.06” x 1.74” (30.6 cm x 12.84 cm x 4.43 cm), not including desk mount feet or mount plate
- Weight: 28.22 oz (800 g)
|
| Security |
- Integrated layer 7 firewall with mobile device policy management
- Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
- Flexible guest access with device isolation
- VLAN tagging (802.1q) and tunneling with IPsec VPN
- PCI compliance reporting
- WEP*, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 – Personal**, WPA3 – Enterprise**, WPA3 – Enhanced Open (OWE)***
- EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
- TKIP and AES encryption
- Enterprise mobility management (EMM) and Mobile device management (MDM) integration
- Cisco ISE integration for guest access and BYOD posturing
* Feature can be enabled by contacting support
** Feature supported on firmware MR 27+ and can be made available on MR 26; see the WPA3 article for more information
*** Feature will be made available via a future software update
|
| Quality of Service |
- Advanced power save (U-APSD)
- WMM access categories with DSCP and 802.1p support
- Layer 7 application traffic identification and shaping
|
| Mobility |
- PMK, OKC, and 802.11r for fast layer 2 roaming
- Distributed or centralized layer 3 roaming
|
| Analytics |
- Embedded location analytics reporting and device tracking
- Global layer 7 traffic analytics reporting per network, per device, and per application
|
| LED Indicators |
- 1 power/booting/firmware upgrade status
|
| Regulatory |
- RoHS
- For additional country-specific regulatory information, please contact Meraki sales
|
| Warranty |
- Lifetime hardware warranty with advanced replacement included
|
| Ordering Information |
- MR46-HW: Meraki MR46 cloud managed 802.11ax AP
- MA-PWR-30W-XX: Meraki AC adapter for MR series (XX = US/EU/UK/AU)
- MA-INJ-4: Meraki MR 802.3at PoE Injector (Power Cord Not Included)
- MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector (Power Cord Not Included)
- Note: Meraki access point license required
|
